Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
1 A. Lay front frame face down with the tube fittings
facing up. Insert 2 shelf pins into threaded holes of front
frame and tighten with the allen wrench.
B. Slide 1 rear frame over tube fitting and fit shelf pins and
small brackets into the smaller tubes of rear frame.
C. Secure frames with 2 allen head screws using allen
wrench.
Thank you for purchasing the Plateau Media Stand.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
COMPONENTS
1 - front frame
2 - rear frames
2 - glass shelves
1 - glass top
PLATEAU MEDIA STAND
Page 1 of 2
Made in China
A
HARDWARE
4 - allen
head screws
8 - rubber bumpons 4 - sponge bumpons
2 - shelf pins
4 - tube caps
2 - short
machine screws
C
B
TOOLS REQUIRED
Allen Wrench (included)
Phillips head screwdriver
Hammer
Missing hardware? Please call 800.606.6387 for replacements.