Assembly Instruction

PIVOT HUTCH
Made in Vietnam - r03 Page 3 of 5
7 With the assistance of another adult, position
assembled unit upright as shown. Attach top panel to
assembled unit with 14 bolts, 14 spring washers, and
14 flat washers as shown.
8 A) Insert 8 shelf pins as desired heights as shown.
B) Place 2 adjustable shelves into assembled unit as
shown. Make sure each shelf is securely supported by each
shelf pin.
top
panel
adjustable
shelves
hutch
buffet
(sold seperately)
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
A
B
7 With the assistance of another adult, carefully place
hutch onto buffet as shown. Attach 2 connecting
brackets to back of hutch/buffet with 2 screws per
bracket as shown. Secure screws with a screwdriver.
Assembly is now complete.
front
frame
6 Fit dowels of assembled unit into corresponding
holes of front frame. Secure front frame with 6 bolts,
6 spring washers, and 6 flat washers as shown.
NOTE: Make sure arrow
labeled “FRONT” on
underside of top panel is
pointing towards the front
front
frame
frame
support
5 Remove frame support from front frame as shown.
With a screwdriver, turn pre-attached bolts
counter-clockwise to detach. Set frame support and
hardware aside and discard.