Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Pivot Hutch

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r03 Page 1 of 5

Thank you for purchasing the Pivot Hutch. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PIVOT HUTCH

2 - connecting

brackets

4 - large

screws

32 - bolts 32 - spring

washers

32 - flat

washers

8 - shelf

pins

Missing hardware? Please call

800.606.6387 for replacements.

8 - small

screws

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - top

panel

1 - bottom

panel

2 - side panels

(1 left, 1 right)

2 - adjustable

shelves

1 - front

frame

1 - partition

1 - back

panel

4 - medium

screws

2 - wall

straps

4 - wall

brackets

4 - plastic anchors

Summary of content (5 pages)

PAGE 1
PIVOT HUTCH HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 32 - bolts 32 - spring washers 2 - connecting brackets 4 - large screws Thank you for purchasing the Pivot Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PIVOT HUTCH partition bottom panel NOTE: Make sure “THIS SIDE UP” labeled on bottom panel is facing toward the partition when assembling as shown 1 Attach bottom panel and partition with 2 bolts, 2 spring washers, and 2 flat washers as shown. Secure bolts with a phillips head screwdriver. back panel 2 Fit dowels of partition into corresponding holes of back panel as shown.
PAGE 3
PIVOT HUTCH front frame front frame frame support 5 Remove frame support from front frame as shown. With a screwdriver, turn pre-attached bolts counter-clockwise to detach. Set frame support and hardware aside and discard. 6 Fit dowels of assembled unit into corresponding holes of front frame. Secure front frame with 6 bolts, 6 spring washers, and 6 flat washers as shown.
PAGE 4
PIVOT HUTCH 7 With the assistance of another adult, carefully place hutch onto buffet as shown. Attach 2 connecting brackets to back of hutch and buffet (sold seperately) with 4 small screws per bracket as shown. Secure screws with a screwdriver. Assembly is now complete. hutch buffet (sold seperately) CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
PAGE 5
PIVOT HUTCH Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to top of bookcase using 2 medium screws as shown. B) Determine the final location of bookcase.