Assembly Instruction

PIVOT BUFFET
Made in Vietnam - r07 Page 2 of 5
1 A) Insert 4 cams into 2 fixed shelves as shown. Make
sure arrows on each cam point towards nearest edge with
holes.
B) Insert 4 cam screws into 2 middle partitions. Secure cam
screws with a phillips head screwdriver.
2 Fit pre-assembled dowels of fixed shelves into
corresponding holes of left/right partitions as shown.
With a screwdriver, turn each cam clockwise until it
securely engages each cam screw.
fixed
shelf
partition
A
B
NOTE: Make sure
arrows on each cam
point towards nearest
edge with holes
left
partition
right
partition
fixed
shelf
left side
panel
right side
panel
back
frame
NOTE: Make sure arrows labeled
“UP” on left/right partition are
pointing towards the top of assembly
NOTE: Make sure arrow labels
on left/right sides points towards
the top of assembly
BOTTOM
BOTTOM
NOTE: Make sure “BOTTOM” labeled
on each fixed shelf is facing towards
the bottom
Customer Service 800.967.6696 | www.crateandbarrel.com
3 Fit dowels of assembled unit into corresponding
holes of back panel as shown.
4 Attach back frame of assembled unit to left/right side
panels with 6 bolts, 6 spring washers, and 6 flat washers.
Secure bolts with a phillips head screwdriver.
NOTE: Make sure arrow
labeled “UP” on back panel
is pointing towards the top
of assembly