Assembly Instruction

Made in China - r03 Page 3 of 3
PILSEN BOOKCASE
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
For added safety and stability, it is recommended that the wall mounting hardware be
installed. For safe mounting, it is essential to use wall anchors appropriate to your
wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever
possible.
A) Attach wall bracket to top of unit using 1 small bolt as shown.
B) Determine the final location of unit. Mark position on the wall, approximately 2"
below the wall bracket mounted to the back of the unit.
C) Drill a pilot hole in the wall stud. If the wall stud is not available, drill a hole in the
wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach wall bracket to the wall by inserting 1 large screw through bracket and
into the plastic anchor in the wall.
E) Place the unit so the wall brackets on the back edge are aligned with the wall
brackets on the wall.
F) Lace one end of the wall strap through both brackets, and into the other end of
the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
OPTIONAL WALL MOUNTING INSTRUCTIONS:
NOTE:
If you are unsure about your
wall type or what mounting
method you should use,
consult a qualified
professional or your local
hardware store.
A
C
D
F
DETAIL VIEW
FROM BELOW
plastic anchor
large screw
wall strap
wall bracket
wall bracket
small bolt
WALL