Assembly Instruction

Made in China - r03 Page 2 of 3

PILSEN BOOKCASE

1 With assistance of another adult, fit 1 top

crossbar and 9 crossbars over corresponding

brackets of left side frame as shown. Loosely

attach each crossbar with 2 bolts as shown,

using an allen wrench.

Repeat steps for right side frame.

At this point, fully tighten all bolts but do not

over tighten. Position unit upright.

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do

not use abrasive cleaners.

right side frame

left side frame

crossbar

top crossbar

NOTE: Do not over tigthen the bolts

2 A) Adhere 4 bumpers per shelf as shown. Press

firmly to secure.

B) Carefully place 5 glass shelves onto corresponding

bumpers of assembly. Make sure each shelf is securely

supported by bumpers.

Assembly is now complete.

glass shelf

NOTE: Make sure all pilot

holes are assembled towards

the bottom as shown

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com