Assembly Instruction

COMPONENTS

Made in China - r03 Page 1 of 3

Thank you for purchasing the Pilsen Bookcase. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PILSEN BOOKCASE

Missing hardware? Please call 800.606.6387 for replacements.

40 - bolts

1 - large

screw

1 - plastic

anchor

1 - wall

strap

2 - wall

brackets

1 - small

bolt

20 - bumpers

ASSEMBLY HARDWARE

MOUNTING HARDWARE

TOOLS REQUIRED

allen wrench (included)

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 - side frames

(1 left, 1 right)

9 - crossbars

5 - glass shelves

1 - top crossbar

(anti-tip pilot hole)

PAGE 1
PILSEN BOOKCASE ASSEMBLY HARDWARE 40 - bolts 20 - bumpers MOUNTING HARDWARE 1 - large screw 1 - small bolt 2 - wall brackets 1 - wall strap 1 - plastic anchor Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Pilsen Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
PILSEN BOOKCASE top crossbar NOTE: Do not over tigthen the bolts right side frame crossbar 1 With assistance of another adult, fit 1 top crossbar and 9 crossbars over corresponding brackets of left side frame as shown. Loosely attach each crossbar with 2 bolts as shown, using an allen wrench. Repeat steps for right side frame. NOTE: Make sure all pilot holes are assembled towards the bottom as shown At this point, fully tighten all bolts but do not over tighten. Position unit upright.
PAGE 3
PILSEN BOOKCASE WALL DETAIL VIEW FROM BELOW A small bolt C plastic anchor D large screw F wall strap wall bracket wall bracket OPTIONAL WALL MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to top of unit using 1 small bolt as shown.