Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Pilsen 52" Media Console

HARDWARE

TOOLS REQUIRED

ASSEMBLY

COMPONENTS

Made in China - r03 Page 1 of 2

Thank you for purchasing the Pilsen Media Console.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PILSEN MEDIA CONSOLE

Missing hardware? Please call

800.606.6387 for replacements.

1 - bottom

glass shelf

1 - top

glasss shelf

24 - bolts

18 - bumpers

1 - middle

glass shelf

2 - side frames

(1 left, 1 right)

NOTE: Make sure feet of side

frames and bottom crossbar

face up as shown during

assembly

2 - bottom

crossbars

2 - top

crossbars

2 - middle

crossbars

6 - support pins

1 A) Fit 2 top crossbars over bracket of left side

frame with 2 bolts per crossbar as shown. Secure, but

do not over tighten, bolts using an allen wrench.

B) Fit 2 middle crossbars over bracket of left side

frame and secure with 2 bolts per crossbar as shown.

C) Fit 2 bottom crossbar over bracket of left side

frame and secure with 2 bolts per crossbar as shown.

Repeat steps A-C for right side frame.

right side

frame

left side

frame

bottom

crossbar

top

crossbar

top

crossbar

middle

crossbar

middle

crossbar

bottom

crossbar

NOTE: Make sure holes

of bottom crossbars

face inward as shown

allen wrench (included)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
PILSEN MEDIA CONSOLE HARDWARE 24 - bolts Missing hardware? Please call 800.606.6387 for replacements. 18 - bumpers 6 - support pins TOOLS REQUIRED allen wrench (included) COMPONENTS 1 - top glasss shelf 1 - middle glass shelf 1 - bottom glass shelf Thank you for purchasing the Pilsen Media Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
PILSEN MEDIA CONSOLE C top glass shelf A bumper C middle glass shelf D bottom glass shelf 2 A) With the assistance of another adult, position media assembly upright. Adhere 18 bumpers to assembly as shown. B) Fit 6 support pins into corresponding holes of media assembly as shown. C) With the assistance of another adult, carefully place top and middle glass shelves onto media assembly as shown. Make sure glass shelves are securely supported by bumpers.