Assembly Instruction

PAYTON 32” X 76” BOOKCASE
Made in China - r03 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: Do not attach back screw
into back panel at this point if
installing optional safety mounting.
Please refer to Optional Safety
Mounting Instructions.
left side
panel
2 A) Fit dowels of crossbar into corresponding holes of
left side panel as shown.
B) Fit dowels of fixed shelf into corresponding holes of
left side panel. Secure fixed shelf to left side panel with
2 bolts as shown, using a phillips head screwdriver. Do
not over tighten the bolts.
C) Fit dowels of bottom panel into corresponding holes
of left side panel. Secure bottom panel to left side
panel with 2 bolts as shown.
top panel
3 A) Fit dowels of crossbar into corresponding holes of
right side panel as shown.
B) Fit dowels of fixed shelf into corresponding holes of
right side panel. Secure fixed shelf to right side panel
with 2 bolts as shown.
C) Fit dowels of bottom panel into corresponding holes
of right side panel. Secure bottom panel to right side
panel with 2 bolts as shown.
4 Fit dowels of top panel into corresponding holes of
assembled unit as shown. Secure top panel to
assembled unit with 7 bolts as shown.
5 Attach back panel to assembled unit with 30 screws
as shown. Secure, but do not over tighten, the screws
using a screwdriver.
back panel
NOTE: Do not over
tighten the screws
right side
panel
crossbar
bottom
panel
A
fixed shelf
B
C
fixed shelf
B
bottom
panel
C
crossbar
A
NOTE: Do not over
tighten the bolts