Assembly Instruction

PAYTON 32” X 30” BOOKCASE
Made in China - r02 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: Do not over
tighten the bolts
left side
panel
2 A) Fit dowels of crossbar into corresponding holes of
left side panel as shown.
B) Fit dowels of bottom panel into corresponding holes
of left side panel. Secure bottom panel to left side
panel with 2 bolts, using an phillips head screwdriver.
Do not over tighten the bolts.
top panel
3 A) Fit dowels of crossbar into corresponding holes of
right side panel as shown.
B) Fit dowels of bottom panel into corresponding holes
of right side panel. Secure bottom panel to right side
panel with 2 bolts as shown.
4 Fit dowels of top panel into corresponding holes of
assembled unit as shown. Secure top panel to
assembled unit with 7 bolts as shown.
5 Attach back panel to assembled unit with 18 screws
as shown. Secure, but do not over tighten, the screws
using a screwdriver.
back panel
B
NOTE: Do not over
tighten the screws
right side
panel
crossbar
bottom panel
A
B
crossbar
bottom panel
A