Assembly Instruction

Page 3 of 3
PAYTON
20” X 76” BOOKCASE
Made in China - r03 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Drill a pilot hole in the wall stud. If the wall stud is not available,
drill a hole in the wall that is slightly smaller in diameter than the
anchor. Gently tap the plastic anchor until the flange of the anchor
is flush with the wall.
B. Insert wall screw through end of wall strap and into plastic
anchor in the wall.
C. Insert back screw through end wall strap and into the top back
of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
back
screw
wall
strap
wall
screw
WALL
NOTE: Insert screws 3/4"-1"
from the edge of the strap
plastic
anchor
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
6 A) With the assistance of another adult, position unit
upright. Insert 12 shelf pins at desired shelf heights as shown.
B) Place 3 adjustable shelves onto shelf pins as shown.
Make sure shelves are securely supported by each shelf pin.
Assembly is now complete.
shelf
pin
adjustable
shelf
A
B
NOTE: Please do the following if your bookcase
is not level.
With the assistance of another adult, adjust
levelers of each leg as necessary.
leveler
METHOD TO ADJUST LEVELERS ON
BOOKCASE