Assembly Instruction

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
Customer Service 800.967.6696 | www.crateandbarrel.com
PATHWAY QUEEN AND KING BED
Made in China r06 Page 2 of 2
2 Align holes in side rails with corresponding holes in
foot rail. Attach with 2 medium screws, 2 spring
washers and 2 flat washers per side rail. Fully
tighten with allen wrench.
3 A. Attach 2 support legs to underside of center
rail as shown with 2 medium screws, 2 spring
washers, and 2 flat washers per leg.
B. Place center rail into position and attach at the
headboard and foot rail with 2 small screws.
4 A) Fit 1 side slat fitting on one end of each slat.
B) Align pegs on underside of side slat fittings with
corresponding holes on side rails and fit each slat
into position. Make sure the slats bow upwards.
5 Insert each open slat end into either side of the center slat
fitting. Fit pins of each center fitting to corresponding holes
in the center rail. Repeat until all slats are securely engaged
in each fitting. Assembly is now complete.
A
A
B
B
B
NOTE: Make sure the
slats bow upwards.
CLEANING AND CARE
A
B