Assembly Instruction

ManualsBrandsCrate & Barrel ManualsBedsCrate & Barrel Pathway King Bed

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China r06 Page 1 of 2

1 With the assistance of another adult, align holes in

side rail with corresponding holes in headboard.

Attach with 2 large screws, 2 spring washers, 2 flat

washers, and 2 rubber washers as shown. Fully

tighten using allen wrench. Repeat for the other side

rail.

Thank you for purchasing the Pathway Queen and King

Bed. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PATHWAY QUEEN AND KING BED

Missing hardware? Please call 800.606.6387 for

replacements.

4 - large

screws

4 - small

screws

28 - side slat

fittings

14 - center slat

fittings

12 - spring

washers

12 - flat

washers

4 - rubber

washers

8 - medium

screws

Allen wrench (included)

1 - headboard

1 - foot rail

2 - side rails

(1 right, 1 left)

28 - slats

1 - center

rail

2 - support

leg

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
PATHWAY QUEEN AND KING BED HARDWARE 4 - large screws 8 - medium screws 4 - small screws 28 - side slat fittings 14 - center slat 12 - spring washers fittings 12 - flat washers 4 - rubber washers Thank you for purchasing the Pathway Queen and King Bed. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
PATHWAY QUEEN AND KING BED A A B B B 2 Align holes in side rails with corresponding holes in foot rail. Attach with 2 medium screws, 2 spring washers and 2 flat washers per side rail. Fully tighten with allen wrench. 3 A. Attach 2 support legs to underside of center rail as shown with 2 medium screws, 2 spring washers, and 2 flat washers per leg. B. Place center rail into position and attach at the headboard and foot rail with 2 small screws. A NOTE: Make sure the slats bow upwards.