Assembly Instruction

PATERSON TWO DOOR CUPBOARD

Made in China - r04 Page 2 of 4

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 A) Insert 4 wood dowels into left and right side

panels as shown.

B) Fit dowels of left and right side panels into corre-

sponding holes of top panel, and attach with 4 small

bolts as shown. Secure, but do not over tighten, bolts

with a phillips head screwdriver.

2 Insert back panel into grooves of side panels as

shown.

left side panel

3 A) Insert 2 barrel nuts into left and right side panels

as shown. Make sure hole of barrel nut aligns with hole in

nearest edge.

B) Fit dowels of assembly into corresponding holes of base

as shown. Secure base with 4 large bolts, using a screw-

driver. Make sure bolts securely engage in barrel nuts.

4 Attach 3 hinges to left and right door fronts with 2

hinge screws per hinge. Secure, but do not over

tighten, screws with a screwdriver.

NOTE: Do not over

tighten the bolts

NOTE: Make sure grooves

are on the same side during

assembly

right side panel

top panel

NOTE: Make sure hole of

barrel nut aligns with holes

in nearest edge

base

back panel

left and right

door fronts