Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Paterson Two-Door Cabinet

Made in China - r04 Page 1 of 4

Thank you for purchasing the Paterson Two Door

Cupboard. This page lists all the contents included in

the box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PATERSON TWO DOOR CUPBOARD

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - top panel 2 - side panels

(1 left, 1 right)

2 - door frames

(1 left, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

4 - small

screws

WALL MOUNTING HARDWARE

2 - large

screws

2 - plastic

anchors

2 - wall

straps

2 - wall

brackets

2 - anti-tip

brackets

8 - shelf

pins

6 - hinges8 - wood

dowels

4 - barrel

nuts

4 - small

bolts

4 - large

bolts

4 - pull

bolts

24 - hinge

screws

1 - base 2 - adjustable shelves 1 - back panel 2 - pulls

COMPONENTS

Missing hardware? Please call 800.606.6387 for replacements.

Summary of content (4 pages)

PAGE 1
PATERSON TWO DOOR CUPBOARD ASSEMBLY HARDWARE 4 - barrel nuts 24 - hinge screws 4 - small bolts 8 - shelf pins 8 - wood dowels 6 - hinges 4 - pull bolts 4 - large bolts WALL MOUNTING HARDWARE Thank you for purchasing the Paterson Two Door Cupboard. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
PATERSON TWO DOOR CUPBOARD NOTE: Do not over tighten the bolts A back panel right side panel left side panel B NOTE: Make sure grooves are on the same side during assembly top panel 1 A) Insert 4 wood dowels into left and right side panels as shown. B) Fit dowels of left and right side panels into corresponding holes of top panel, and attach with 4 small bolts as shown. Secure, but do not over tighten, bolts with a phillips head screwdriver. 2 Insert back panel into grooves of side panels as shown.
PAGE 3
PATERSON TWO DOOR CUPBOARD Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges B right door frame B A A left door frame 5 With assistance of another adult, position unit upright as shown. Attach left and right door frames to side panels with 2 hinge screws per hinge. 6 A) Attach 1 pull to left and right door frames with 2 pull bolts per pull as shown, using a screwdriver. B) Insert 12 shelf pins at desired shelf heights. Press pins firmly to secure.
PAGE 4
PATERSON TWO DOOR CUPBOARD HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated. 1) Side to side adjustment: Loosen screw A, adjust gap with screw B and re-tighten screw A. 3) Height adjustment: Loosen screw C, adjust door height and retighten screw C. 2) Depth adjustment: Loosen screw A, push hinge arm forwards or backwards, re-tighten screw A.