Assembly Instruction

PATERSON BENCH
Made in China - r04 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 Fit dowels of back panel into corresponding holes of
left and right side panels as shown.
6 With assistance of another adult, carefully fit dowels
of back/side assembly into corresponding holes of top
assembly. Secure cams.
7 Insert 8 barrels nuts into assembly as shown. Using
a screwdriver, align hole in barrel nut with holes in
nearest edge.
NOTE: Make sure pilot holes
in back panel face outwards
during assembly
back panel
right side panel
left side panel
back/side
assembly
top
assembly
NOTE: Make sure hole
in barrel nut aligns with
hole in nearest edge
NOTE: Make sure cams in back/side
panels are secured to cam screws in
top assembly
4 Insert 2 cams and 10 wood dowels into back
panel as shown.
back panel
NOTE: Make sure the cams in
back/side panels are positioned
at the bottom during assembly