Assembly Instruction

PATERSON BENCH
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 A) Insert 2 cams and 4 wood dowels into partition as shown. Make sure arrow on each cam
points toward nearest edge with holes.
B) Insert 8 cam screws into top panel as shown. Secure, but do not over tighten, with a phillips
head screwdriver.
2 Fit dowels of partition into corresponding holes of top
panel as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
3 Insert 2 cams and 4 wood dowels in left and right
side panels as shown.
B
NOTE: Do not over
tighten the cam screws
partition
NOTE: Make sure arrow on
each cam points toward nearest
edge with holes
top panel
partition
top panel
right side panel
NOTE: Make sure cams in
partition are secured to
cam screws in top panel
A
left side panel