Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Paterson Storage Bench

Made in China - r04 Page 1 of 4

Thank you for purchasing the Paterson Bench. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PATERSON BENCH

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

8 - cam

screws

8 - cams22 - wood

dowels

8 - barrel

nuts

8 - large

bolts

COMPONENTS

2 - side panels

(1 left, 1 right)

1 - partition 1 - top panel

1 - back panel 1 - cushion

(sold separately)

1 - base

Missing hardware?

Please call 800.606.6387 for replacements.

Summary of content (4 pages)

PAGE 1
PATERSON BENCH HARDWARE 22 - wood dowels 8 - cam screws 8 - cams 8 - large bolts Missing hardware? Please call 800.606.6387 for replacements. 8 - barrel nuts Thank you for purchasing the Paterson Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PATERSON BENCH NOTE: Do not over tighten the cam screws NOTE: Make sure arrow on each cam points toward nearest edge with holes A partition B top panel 1 A) Insert 2 cams and 4 wood dowels into partition as shown. Make sure arrow on each cam points toward nearest edge with holes. B) Insert 8 cam screws into top panel as shown. Secure, but do not over tighten, with a phillips head screwdriver.
PAGE 3
PATERSON BENCH right side panel back panel NOTE: Make sure pilot holes in back panel face outwards during assembly back panel NOTE: Make sure the cams in back/side panels are positioned at the bottom during assembly left side panel 4 Insert 2 cams and 10 wood dowels into back panel as shown. NOTE: Make sure cams in back/side panels are secured to cam screws in top assembly 5 Fit dowels of back panel into corresponding holes of left and right side panels as shown.
PAGE 4
PATERSON BENCH NOTE: Do not over tighten the bolts cushion (sold separately) base 8 With assistance of another adult, fit dowels of assembly into corresponding holes of base. Using a screwdriver, attach base with 8 large bolts and through each barrel nut as shown. Do not over tighten the bolts. 9 With assistance of another adult, position unit upright. Place cushion (sold separately) onto top assembly as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth.