Assembly Instruction

Made in China - r06 Page 3 of 4
PATERSON DESK
left side
frame
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B
A
C
C
5 A) Using a screwdriver, remove set screws from
barrel nuts. Insert 2 barrel nuts into desk assembly
and crossbar as shown. Fit cam screws of left side
frame into barrel nuts of desk assembly and
crossbar. Insert 1 set screw into each barrel nut and
secure.
B) Secure left side frame to desk assembly with 4
small bolts, 4 spring washers and 4 flat washers.
Secure, but do not over tighten, the bolts using an
allen wrench.
C) Secure left side frame to desk assembly with 2
large bolts, 2 spring washers and 2 flat washers as
shown, using an allen wrench.
B
right side
frame
NOTE: Do not over
tighten the bolts
4 A) With the assistance of another adult, place desk
assembly face down onto a clean, padded surface.
Using a screwdriver, remove set screws from barrel
nuts. Insert 1 barrel nut into desk assembly as shown.
Fit cam screw of right side frame into barrel nut of desk
assembly. Insert 1 set screw into barrel nut and secure.
B) Secure right side frame to desk assembly with 4
small bolts, 4 spring washers and 4 flat washers.
Secure, but do not over tighten, the bolts using an allen
wrench.
C) Secure right side frame to desk assembly with 2
large bolts, 2 spring washers and 2 flat washers as
shown, using an allen wrench.
desk assembly
B
A
C
C
B
A
A
A