Assembly Instruction

Made in China - r06 Page 2 of 4

PATERSON DESK

2 A) Insert 2 cam screws into left and right side

frames as shown. Secure, but do not over tighten,

cam screws with a phillips head screwdriver.

B) Insert 2 wood dowels into crossbar as shown.

NOTE: Do not

over tighten the

cam screws

left and right

side frames

crossbar

right side

frame

3 A) Using a screwdriver, remove set screws from

barrel nuts.

B) Insert 1 barrel nut into the crossbar as shown.

Make sure hole of barrel nut aligns with hole on end of

crossbar.

C) Fit dowel of crossbar and cam screw of right side

frame into corresponding holes as shown.

D) Secure crossbar to right side frame by inserting a

set screw into barrel nut. Tighten with a phillips

head screwdriver, making sure set screw securely

engages the cam screw of the right side frame.

Align hole of barrel nut

with hole on end of

crossbar

set screw

barrel nut

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com