Assembly Instruction

PATERSON CORNER MEDIA STAND
Made in China - r13 Page 3 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
6 A) Secure large side panels to left/right small panels
and back panel with 6 large screws as shown, using a
phillips head screwdriver. Do not over tighten the
screws.
B) Insert 13 wood dowels into assembled unit as shown.
7 A) Insert 6 cams and 2 barrel nuts into assembled
unit as shown. Make sure arrows on each cam point
toward nearest edge with holes. Using a screwdriver,
align hole of each barrel nut with the hole in the nearest
edge.
B) With the assistance of another adult, fit dowels of
assembled unit into corresponding holes of base. With a
screwdriver, turn each cam clockwise until it securely
engages each cam screw.
C) Insert 2 large bolts into barrel nuts of small side
panels. Make sure bolts securely engage each barrel nut.
NOTE: Do not over
tighten the screws
B
C
A
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
NOTE: Make sure
hole of barrel nut
aligns with the
hole in nearest
edge
base
right small
side panel
left small
side panel
B
A
right small
side panel
left small
side panel
back panel
5 Secure left and right small side panels to top panel
with 2 small bolts per side as shown.