Assembly Instruction

PATERSON BOOKCASE
Made in China - r01 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 Fit dowels of front frame into corresponding holes of
left and right side panels as shown. Secure all cams.
6 A) With the assistance of another adult, place
assembled unit face down onto a clean, padded surface.
Insert 2 barrel nuts into left/right side panels and front
frame as shown. Using a screwdriver, align hole of each
barrel nut with the hole in nearest edge.
B) Fit dowels of assembled unit into corresponding holes
of base. Secure base with 6 large bolts. Make sure bolts
securely engage each barrel nut.
7 Slide back panel into corresponding grooves of
assembled unit as shown.
front frame
back
panel
B
A
B
A
NOTE: Make sure hole of
barrel nut aligns with the
hole in nearest edge
NOTE: Do not over
tighten the bolts
top
panel
base
8 With the assistance of another adult, position unit
upright. Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure top panel with 6
small bolts as shown.