Assembly Instruction

PASSAGES MEDIA STORAGE CONSOLE
Made in China - r08 Page 3 of 3
5 With the assistance of another adult, carefully fit dowels
of assembled unit into corresponding holes of front frame
as shown. Secure with 12 small bolts, 12 spring washers,
and 12 flat washers as shown, using a screwdriver.
6 Fit dowels of each leg into corresponding holes of
assembled unit as shown. Secure with 1 large bolt, 1 spring
washer, and 1 flat washer as shown, using a screwdriver.
top
panel
back
panel
leg
A
B
adjustable
shelves
pull
shelf
pin
A
A
B
C
C
9 A) Insert 8 shelf pins at desired shelf heights as shown.
B) Place 2 adjustable shelves into assembled unit. Make sure
each shelf is securely supported by shelf pins.
C) Attach 2 pulls to doors of assembled unit with 2 pull screws
per pull as shown. Secure screws with a screwdriver.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished with a protective clear lacquer.
Customer Service 800.967.6696 | www.crateandbarrel.com
8 Attach back panel onto assembled unit with 20
small screws as shown. Secure screws with a
screwdriver.
6 Fit dowels of assembled unit into corresponding holes of
top panel as shown. Secure with 6 small bolts, 6 spring
washers, and 6 flat washers as shown.