Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Passages Storage Console

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r08 Page 1 of 3

Thank you for purchasing the Passages Media Storage

Console. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PASSAGES MEDIA STORAGE CONSOLE

Missing hardware? Please call 800.606.6387 for replacements.

1 - top

panel

1 - fixed

shelf

1 - back

panel

1 - front

frame

1 - bottom

panel

2 - side panels

(1 left, 1 right)

1 - large

partition

1 - small

parition

2 - adjustable

shelves

4 - legs

16 - wood

dowels

4 - large

screws

28 - small

bolts

4 - large

bolts

32 - flat

washers

32 - spring

washers

4 - pull

screws

2 - pulls

20 - small

screws

8 - shelf

pins

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (3 pages)

PAGE 1
PASSAGES MEDIA STORAGE CONSOLE HARDWARE 4 - large screws 32 - flat washers Thank you for purchasing the Passages Media Storage Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PASSAGES MEDIA STORAGE CONSOLE A small partition A large partition B B fixed shelf bottom panel 1 Fit dowels of small partition into corresponding holes of fixed shelf as shown. Attach fixed shelf with 2 large screws. Secure screws with a phillips head screwdriver. 2 A) Fit dowels of large partition into corresponding holes of assembled unit as shown. Secure with 2 small bolts, 2 spring washers, and 2 flat washers, using a screwdriver.
PAGE 3
PASSAGES MEDIA STORAGE CONSOLE leg 5 With the assistance of another adult, carefully fit dowels of assembled unit into corresponding holes of front frame as shown. Secure with 12 small bolts, 12 spring washers, and 12 flat washers as shown, using a screwdriver. 6 Fit dowels of each leg into corresponding holes of assembled unit as shown. Secure with 1 large bolt, 1 spring washer, and 1 flat washer as shown, using a screwdriver.