Assembly Instruction

PARKER SPIRITS CABINET
Made in China - r05 Page 3 of 4Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
7 Attach 2 top panels to assembly with 2 small bolts,
2 spring washers and 2 flat washers per panel as shown.
Do not fully tighten the bolts. Make sure top panels are
orientated as shown. If the top panels are not aligned,
make sure assembly is level and adjust levelers as
necessary. At this point, secure but do not over tighten
the bolts.
5 Place hinged panel onto pre-assembled shelf pins
as shown, and secure with 4 large screws.
8 Fit slots of 5 vertical wine racks into corresponding
slots of 2 horizontal wine racks as shown.
6 A) Open hinged panel as shown, and secure pre-
assembled arm hinge with 2 small screws.
B) Attached 1 pull to hinged panel with 2 small screws.
A
B
NOTE: Make sure
top panels are
aligned. Adjust
levelers as
necessary.
levelers