Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Parker Spirits Cabinet

PARKER SPIRITS CABINET

Made in China - r05 Page 1 of 4

Thank you for purchasing the Parker Spirits Cabinet.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this

product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

1 - right

frame

4 - legs

1 - drawer assembly

1 - bottom frame

phillips head screwdriver

12 - large

bolts

We recommend the use of hand tools instead of power tools.

4 - small

bolts

16 - spring

washers

4 - large

screws

16 - flat

washers

allen wrench (included)

2 - top panels 2 - horizontal

wine racks

2 - pulls

1 - left

frame

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

6 - small

screws

1 - hinged

panel

1 - bottom

back panel

1 - middle panel 1 - top

back panel

5 - vertical

wine racks

Summary of content (4 pages)

PAGE 1
PARKER SPIRITS CABINET HARDWARE 12 - large bolts 16 - spring washers 16 - flat washers 4 - large screws 6 - small screws 4 - small bolts Thank you for purchasing the Parker Spirits Cabinet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PARKER SPIRITS CABINET NOTE: Do not over tighten the bolts NOTE: During assembly, make sure grooves of left and right frames are facing each other as shown. 1 Attach 4 legs to bottom frame with 2 large bolts, 2 spring washers and 2 flat washers per leg. Secure, but do not over tighten, bolts with an allen wrench. 2 With the assistance of another adult, fit pre-assembled dowels of right frame into corresponding holes of bottom frame as shown.
PAGE 3
PARKER SPIRITS CABINET A B 5 Place hinged panel onto pre-assembled shelf pins as shown, and secure with 4 large screws. 6 A) Open hinged panel as shown, and secure preassembled arm hinge with 2 small screws. B) Attached 1 pull to hinged panel with 2 small screws. NOTE: Make sure top panels are aligned. Adjust levelers as necessary. levelers 7 Attach 2 top panels to assembly with 2 small bolts, 2 spring washers and 2 flat washers per panel as shown. Do not fully tighten the bolts.
PAGE 4
PARKER SPIRITS CABINET 9 Insert wine rack assembly into cabinet assembly as shown. 10 Attach 1 pull to drawer assembly with 2 small screws as shown. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. It is recommended to use coasters to protect against heat and water. 11 Fit drawer glides of drawer into corresponding glides of assembly.