Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
PARALLEL DESK
Page 2 of 2
Made in China - r05
2 A. Insert 1 tube cap into the top of each leg in the
remaining leg frame.
B. Attach leg frame using same method as in Step 1.
Secure each crossbar with 2 allen head screws. Do not
fully tighten screws.
4 Insert 1 tube cap into the open end of each leg. If
necessary, gently tap each tube cap into position with a
hammer.
3 Position frame assembly onto table top, aligning holes in
tabs with pre-drilled holes in table top. Using a phillips
head screwdriver, secure each tab with 1 wood screw and
1 washer.
5 At this point, fully tighten all 8 allen head screws with
the allen wrench.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
x 8
x 2
A
B