Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
PARALLEL BOOKCASE
Page 2 of 3
Made in China - r06
2 Attach remaining side frame with 5 allen head
screws. Do not fully tighten the screws.
4 With the assistance of another adult, lift frame
assembly into an upright position. Fit slots on the
underside of the 5 shelves onto corresponding pins on
the side and back frames and press firmly into position.
3 Insert 1 tube cap into the open end of each leg. If
necessary, gently tap each tube cap into position with a
hammer.
5 Secure each shelf into position by inserting 1 short
wood screw through each peg of the side frames and into
the shelf above. Fully tighten with a phillips head
screwdriver.
At this point fully tighten all allen head screws from Steps
1 & 2 with the allen wrench.
x 20
NOTE:
Do not over tighten the
screws.