Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
PACIFIC TWIN BED
Page 2 of 2
Made in Lithuania - r01
2 Fasten the other ends of the side rails to the footboard
using the same method as Step 1.
3 Fasten 1 bolt into each of the 3 holes at the headboard/side
rail connection. Secure with the allen wrench.
5 Make sure that the canvas webbing between the slats is
taught. Secure the slats to the side rails with 6 screws
where indicated above. Note: There will not be pre-drilled
holes in either the slats or the side rails. Assembly is now
complete.
4 Place slat roll into position on the side rail supports and
unroll towards the headboard. IMPORTANT: Make sure the
slats bow upwards.
Slats should
bow upward
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
x 2