Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Pacific Maple Nightstand

Customer Service 800-967-6696 | http://www.crateandbarrel.com

Thank you for purchasing the Pacific Night

Stand. This page lists all the contents included

in the box. Please take time to identify the

hardware as well as the individual components

of this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

COMPONENTS

1 - bottom panel

1 - drawer

bottom

1 - drawer back

1 - top panel

PACIFIC NIGHTSTAND

Page 1 of 3

Made in Lithuania - r05

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

Flat head screwdriver

Missing hardware? Please call 800.606.6387 for replacements.

1 - drawer

knob

4 - large

wood screws

1 - large

bolt

4- small

wood screws

16 - cam

screws

16 - cam

covers

16 - cams

1 - right side panel1 - left side panel

1 - left

drawer side

1 - right

drawer side

1 - drawer front

1 - left case glide

(marked with an "L")

1 - right case glide

(marked with an "R")

1 - left drawer glide

1 - right drawer glide

4 - machine

screws

Summary of content (3 pages)

PAGE 1
PACIFIC NIGHTSTAND HARDWARE 1 - large bolt 16 - cams Thank you for purchasing the Pacific Night Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PACIFIC NIGHTSTAND NOTE: Do not over tighten the screws. Make sure this arrow points towards the shelf edge Bottom Shelf (underside) The first screw goes in this hole Back Right Panel Left Panel 1 Insert 4 cams into the underside of the bottom shelf, making sure arrows on each cam point towards the shelf edge as shown. 2 Atttach left case glide (marked "L") to the left side panel and the right case glide (marked "R") to the right side panel as shown.
PAGE 3
PACIFIC NIGHTSTAND A A B C B drawer bottom panel 5 A. Insert 4 cam screws into the top panel and secure with a flat head screwdriver. B. Insert 4 cams into the tops of side panels. Fit top panel into position and secure all cams with a phillips head screwdriver. C. Conceal all cams by inserting cam covers into all cams. 6 A. Attach left & right drawer sides to drawer back with 4 large wood screws. Do not overtighten the screws. B. Slide drawer bottom panel into grooves in drawer side and back panels.