Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PACIFIC FULL, QUEEN, KING BED

Page 2 of 3

Made in Lithuania - r01

2 Fasten the other ends of the side rails to the footboard

using the same method as Step 1.

3 Fasten 1 bolt into each of the 3 holes at the headboard/side

rail connection. Secure with the small allen wrench.

4 A. Attach support leg to center rail with 1 medium

screw. Secure with the large allen wrench.

B. Attach center rail assembly to head & footboard by fitting

tabs of head & footboard hardware into slots of center rail

hardware. Make sure the center rail locks in place.

5 Place slat roll into position on the side rail supports and

unroll towards the headboard. IMPORTANT: Make sure the

slats bow upwards.

Slats should

bow upward

x 2

Side View