Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 With the assistance of another adult, stand headboard

upright. Fit the tabs of the left and right side rails down into

the corresponding slots in the headboard hardware. Make

sure to orient the side rails as shown with the ends of the

rails with the 3 holes secured to the headboard.

Thank you for purchasing the Pacific Bed. This page lists

all the contents included in the box. Please take time to

identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect

them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

2 - side rails

(1 left, 1 right)

1 - center rail

1 - footboard

1 - headboard

2 - slat rolls 1 - support leg

TOOLS REQUIRED

Small Allen wrench (included)

Large Allen wrench (included)

Phillips head screwdriver

PACIFIC FULL, QUEEN, KING BED

Page 1 of 3

Made in Lithuania - r01

6 - bolts

Missing hardware? Please call 800.606.6387 for

replacements.

1 - medium

screw

12 - small

screws

PAGE 1
PACIFIC FULL, QUEEN, KING BED HARDWARE 6 - bolts 1 - medium screw 12 - small screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Pacific Bed. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PACIFIC FULL, QUEEN, KING BED x2 2 Fasten the other ends of the side rails to the footboard using the same method as Step 1. 3 Fasten 1 bolt into each of the 3 holes at the headboard/side rail connection. Secure with the small allen wrench. A Slats should bow upward B Side View B 4 A. Attach support leg to center rail with 1 medium screw. Secure with the large allen wrench. B.
PAGE 3
PACIFIC FULL, QUEEN, KING BED 6 Make sure that the canvas webbing between the slats is taught. Secure the slats to the side rails with 12 small screws as indicated in the illustration. Note: There will not be pre-drilled holes in either the slats or the side rails. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.