Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Pacific Maple 4 Drawer Chest

Customer Service 800-967-6696 | http://www.crateandbarrel.com

Thank you for purchasing the Pacific Dresser. This

page lists all the contents included in the boxes.

Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage. Note: 2 people are required to safely

assemble this product.

PACIFIC 4-DRAWER CHEST

Page 1 of 3

Made in Lithuania - r05

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

Flat head screwdriver

Missing hardware? Please call 800.606.6387 for replacements.

8 - drawer

knobs

16 - large

wood screws

8 - large

bolts

16- small

wood screws

31 - cam

screws

24 - machine

screws

31 - cam

covers

31 - cams

4 - left case glides

(marked with an "L")

4 - right case glides

(marked with an "R")

4 - left drawer glides

4 - right drawer glides

COMPONENTS

1 - bottom panel

4 - drawer

bottoms

4 - drawer backs

1 - top panel

1 - right side panel

1 - left side panel

4 - left

drawer sides

4 - right

drawer sides

4 - drawer fronts

1 - back panel

Summary of content (3 pages)

PAGE 1
PACIFIC 4-DRAWER CHEST HARDWARE 31 - cams Thank you for purchasing the Pacific Dresser. This page lists all the contents included in the boxes. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
PACIFIC 4-DRAWER CHEST NOTE: Do not over tighten the screws. Make sure this arrow points towards the shelf edge The first screw goes in this hole Bottom Panel (underside) Left Panel 1 Insert 4 cams into the underside of the bottom panel, making sure arrows on each cam point towards the shelf edge as shown. Back Right Panel 2 Atttach 4 left case glides (marked "L") to the left side panel and the 4 right case glides (marked "R") to the right side panel as shown.
PAGE 3
PACIFIC 4-DRAWER CHEST A A B C B drawer bottom panel 5 A. Insert 4 cam screws into the top panel and secure with a flat head screwdriver. B. Insert 4 cams into the tops of side panels. Fit top panel into position and secure all cams with a phillips head screwdriver. C. Conceal all cams by inserting cam covers into all cams. x4 6 A. Attach left & right drawer sides to drawer back with 4 large wood screws. Do not over tighten the screws. B.