Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

Thank you for purchasing the Onyx Side Table. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

TOOLS REQUIRED

Allen wrench (included)

ONYX SIDE TABLE

Page 1 of 2

Made in China - r02

Missing hardware? Please call

800.606.6387 for replacements.

4 - long bolts

4 - flat washers

4 - feet caps4 - split washers

4 - top

posts

1 A. Place top frame face down on a padded surface.

Attach 4 top posts as shown, fitting wood dowels of posts

into corresponding holes in top frame.

B. Fit top post dowels into corresponding holes in the shelf

frame. Firmly press assembly together, applying even

pressure to each portion of the shelf frame.

1 - bottom

frame (small)

1 - shelf

frame (medium)

1 - top

frame (large)

4 - middle

posts

4 - feet

1 - glass top

2 - glass shelves

PAGE 1
ONYX SIDE TABLE HARDWARE 4 - long bolts 4 - split washers Thank you for purchasing the Onyx Side Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 4 - flat washers 4 - feet caps Missing hardware? Please call 800.606.
PAGE 2
ONYX SIDE TABLE B A 2 Fit dowels of middle posts into corresponding holes in shelf frame. 3 A. Fit bottom frame onto dowels of middle posts. Firmly press assembly together, applying even pressure to each portion of the bottom frame. B. Attach 4 feet as shown, fitting wood dowels of feet into corresponding holes in bottom frame. B A 4 A. Secure each leg assembly with 1 flat washer, 1 split washer and 1 long bolt per leg. Fully tighten each leg assembly with the allen wrench. B.