Assembly Instruction

ONYX PERSONAL TABLE
Made in China R04 Page 2 of 2
2 Insert 2 wood dowels and 2 cam screws into
each leg as shown. Secure cam screws with a
Phillips head screwdriver, but do not overtighten.
3 A) Fit dowels and cam screws of 4 legs into
corresponding holes on all crossbars, as shown
above.
B) Turn each cam clockwise with a Phillips head
screwdriver until each cam securely engages each
cam screw.
4 Place top frame face down on a padded surface.
Secure leg assembly onto top frame with 8 bolts.
Tighten bolts with an Allen wrench, but do not
overtighten.
5 With the assistance of another adult, turn table
assembly upright. Carefully insert 1 glass top and 1
glass shelf onto recessed ledges on each frame.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com