Assembly Instruction

HARDWARE

TOOLS

COMPONENTS

Made in China R04 Page 1 of 2

1 Insert 2 cams into the left crossbar, right cross-

bar, front crossbar, and back crossbar. Make sure

arrow on each cam points out towards holes.

Thank you for purchasing the Onyx Personal Table. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

ONYX PERSONAL TABLE

Missing hardware? Please call

800.606.6387 for replacements.

8 - cams

8 - wood

dowels

8- cam

screws

8 - bolts

1 - top frame

2 - front

& back crossbars

2 - right

& left crossbars

4 - legs

1 - glass top

1 - glass shelf

Allen wrench (included)

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

PAGE 1
ONYX PERSONAL TABLE HARDWARE 8 - cams 8 - wood dowels 8- cam screws 8 - bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Onyx Personal Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ONYX PERSONAL TABLE B A 2 Insert 2 wood dowels and 2 cam screws into each leg as shown. Secure cam screws with a Phillips head screwdriver, but do not overtighten. 4 Place top frame face down on a padded surface. Secure leg assembly onto top frame with 8 bolts. Tighten bolts with an Allen wrench, but do not overtighten. Made in China R04 3 A) Fit dowels and cam screws of 4 legs into corresponding holes on all crossbars, as shown above.