Assembly Instruction

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
OCTAVE PANEL BED NIGHTSTAND S/2
Made in Vietnam - r05 Page 2 of 2
3 Position assembled unit as shown. Secure left back
panel to left nightstand assembly with 4 large bolts, 4
flat washers and 4 spring washers per side as shown.
Repeat steps 2-3 for right nightstand assembly.
4 With assistance of another adult, attach left and right
nightstand assemblies to headboard of bed assembly
with 4 back panel brackets. Do not adjust levelers until
brackets are fully attached. Loosely secure each back
panel bracket with 7 small bolts and 7 spring washers as
shown. Once all bolts have been loosely attached, fully
tighten all bolts. At this point, adjust levelers on headboard
as necessary.
Assembly is now complete.
CLEANING AND CARE
2 Attach left nightstand assembly to left back panel
with 2 small bolts and 2 spring washers as shown,
using an allen wrench.
left back
panel
left nightstand
assembly
left back panel
left nightstand
assembly
headboard
left nightstand
assembly
right nightstand
assembly
bed
assembly
back
panel
bracket
corner
bracket
NOTE: Do not adjust
levelers until brackets
are fully attached