Assembly Instruction

ManualsBrandsCrate & Barrel ManualsBedsCrate & Barrel Octave Panel Bed Full

HARDWARE

TOOLS REQUIRED

COMPONENTS

BOX 1

COMPONENTS

BOX 2

Made in Vietnam - r06 Page 1 of 3

Thank you for purchasing the Octave Panel Bed Full.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

OCTAVE PANEL BED FULL

Missing hardware?

Please call 800.606.6387 for replacements.

6 - large

bolts

26 - end

slat caps

13 - center

slat caps

36 - spring

washers

NOTE: Do not over

tighten the bolts

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

30 - small

bolts

1 Attach pre-assembled brackets of left and right

headboard side frames to headboard as shown. Secure

each bracket with 4 small bolts and 4 spring washers

as shown. Secure, but do not over tighten, bolts with an

allen wrench.

right

headboard

side frame

left

headboard

side frame

headboard

bracket

allen wrench (included)

1 - headboard

1 - foot rail

2 - side rails

(1 right, 1 left)

26 - slats

1 - center

rail

2 - support legs

2 - headboard

side frames

(1 left, 1 right;

brackets pre-assembled)

Summary of content (3 pages)

PAGE 1
OCTAVE PANEL BED FULL HARDWARE 36 - spring washers 30 - small bolts 13 - center slat caps Thank you for purchasing the Octave Panel Bed Full. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
OCTAVE PANEL BED FULL A foot rail center rail B A left side rail B support leg A support leg center rail right side rail 2 Attach 2 support legs to center rail with 2 small bolts and 2 spring washers per leg as shown, using an allen wrench. A 3 A) With assistance of another adult, attach left and right side rails to foot rail with 2 small bolts and 2 spring washers per rail as shown. B) Attach center rail to foot rail with 2 small bolts and 2 spring washers as shown.
PAGE 3
OCTAVE PANEL BED FULL 6 A) Insert 1 end of slat into center slat cap as shown. B) Insert slat end cap into corresponding holes of side rail as shown. Repeat for remaining slat assemblies. Assembly is now complete. A slat end slat cap B A NOTE: Make sure each slat fits securely into each slat cap, and that each slat bows upwards. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Made in Vietnam - r06 Customer Service 800.967.