Assembly Instruction

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from heat
and water.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
OCTAVE FOUR DRAWER CHEST
Made in Vietnam - r04 Page 3 of 3
8 Insert drawer assembly into the case, fitting wheels
of drawer glide into rail of case glides.
Repeat step 8 for remaining drawer assembly.
Assembly is now complete.
top drawer
back
top drawer
right side
top drawer
left side
top drawer
front
pull
drawer
bottom
A
B
A
B
NOTE: Make
sure wheels are
at the back
crossbar
drawer right
side
drawer
bottom
crossbar
pull
drawer
back
drawer left
side
NOTE: Make
sure wheels are
at the back
drawer
front
6 A) Fit drawer bottom into grooves of drawer back and
top drawer front as shown. Fit dowels of drawer assembly
into corresponding holes of top drawer sides. Secure with
4 screws per side, using a screwdriver.
B) Attach crossbar to drawer assembly with 4 screws.
C) Attach 2 pulls to top drawer front with 2 pull bolts per
pull, using a screwdriver.
7 A) Fit drawer bottom into grooves of drawer back and
drawer front as shown. Fit dowels of drawer assembly
into corresponding holes of drawer sides. Secure with
4 screws per side, using a screwdriver.
B) Attach crossbar to drawer assembly with 4 screws.
C) Attach 2 pulls to drawer front with 2 pull bolts per bolt
using a screwdriver.
Repeat step 7A-C for remaining drawer assembly.
A
B
C
C
leg
assembly
5 Attach leg assembly to bottom of assembled unit
with 8 small bolts, 8 spring washers and 8 flat washers
as shown. Secure bolts with a screwdriver. With the
assistance of another adult, carefully position unit upright.
small bolt
spring washer
flat washer
CLEANING AND CARE