Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Octave Four-Drawer Chest

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r04 Page 1 of 3

Thank you for purchasing the Octave Four Drawer

Chest. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

OCTAVE FOUR DRAWER CHEST

Missing hardware?

Please call 800.606.6387 for replacements.

48 - screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

8 - small

bolts

4 - large

bolts

20 - flat

washers

20 - spring

washers

16 - pull

bolts

8 - pulls

8 - medium

bolts

4 - bottom

screws

phillips head screwdriver

(We recommend the use of hand tools instead of power tools.)

1- top panel 1 - partition

3 - drawer

fronts

1 - back

panel

4 - drawer

bottoms

2 - side panels

(1 right, 1 left)

1 - bottom

panel

1 - leg assembly

3 - drawer

backs

6 - drawer sides

(3 right, 3 left)

2 - top drawer sides

(1 right, 1 left)

1 - top

drawer back

1 - top

drawer front

4 - drawer

crossbars

Summary of content (3 pages)

PAGE 1
OCTAVE FOUR DRAWER CHEST HARDWARE 48 - screws 4 - bottom screws 20 - flat washers Thank you for purchasing the Octave Four Drawer Chest. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
OCTAVE FOUR DRAWER CHEST medium bolt B B medium bolt NOTE: Do not over tighten the bolts spring washer spring washer flat washer flat washer partition partition B right side panel B A back panel back panel left side panel 1 A) With the assistance of another adult, fit back panel into grooves of right side panel as shown. B) Fit pre-assembled dowels of partition into corresponding holes of right side panel as shown.
PAGE 3
OCTAVE FOUR DRAWER CHEST B A flat washer spring washer top drawer right side small bolt top drawer back drawer bottom top drawer left side B pull top drawer front A NOTE: Make sure wheels are at the back leg assembly 5 Attach leg assembly to bottom of assembled unit with 8 small bolts, 8 spring washers and 8 flat washers as shown. Secure bolts with a screwdriver. With the assistance of another adult, carefully position unit upright.