Assembly Instruction

Made in Vietnam - r06 Page 3 of 3
NOTCH STORAGE CART
6 Fit pre-assembled dowels of assembled unit into
corresponding holes of bottom panel as shown. Secure
bottom panel with 8 large screws using a screwdriver.
Do not over tighten the screws.
7 Attach 2 casters and 2 lock casters to assembled
unit with 4 medium screws per caster as shown. With
the assistance of another adult, position unit upright.
bottom
panel
9 A) Attach door front to assembled unit with 3 small
screws per hinge as shown.
B. Insert 4 shelf pins at desired shelf height and place small
shelf as shown. Make sure shelf is securely supported by
each shelf support.
Assembly is now complete.
lock
casters
small
shelf
door
front
hinge
shelf pin
8 Attach large shelf to assembled unit by sliding shelf
over cleats as shown. Secure with 4 small bolts. At this
point, cover all exposed cams with a cam cover.
casters
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com