Assembly Instruction

Made in Vietnam- r06 Page 2 of 3
NOTCH STORAGE CART
2 A) Insert 2 cam screws into top panel as shown.
B) Insert 1 cam screw into front panel as shown.
C) Insert 2 cam screws into back panel as shown.
Secure, but do not over tighten, cam screws using a
phillips head screwdriver.
3 Fit cam screw of front panel into corresponding
hole of interior panel. With a screwdriver, turn the cam
clockwise until it securely engages the cam screw.
4 Fit cam screws of back panel into corresponding
holes of interior panel and exterior panel. Secure all
cams.
NOTE: Do not over
tighten cam screws
back panel
front panel
back panel
interior
panel
front panel
top panel
5 Place top panel face down onto a clean, padded
surface. With the assistance of another adult, fit pre-
assembled dowels of assembled unit into corresponding
holes of top panel as shown. Secure top panel with 4
flat washers, 4 spring washers and 4 large bolts.
exterior panel
interior
panel
B
C
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
top panel
A