Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Notch Storage Cart

ASSEMBLY HARDWARE

TOOLS REQUIRED

ASSEMBLY

COMPONENTS

Made in Vietnam - r06 Page 1 of 3

Thank you for purchasing the Notch Storage Cart. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

NOTCH STORAGE CART

Missing hardware?

Please call 800.606.6387

for replacements.

1 - door

front

1 - bottom

panel

1 - top panel

1 - large

shelf

1 - small

shelf

5 - cam

screws

5 - cams 4 - shelf

pins

1 - front

panel

1 - back

panel

1- interior

panel

4 - small

bolts

8 - large

screws

4 - spring

washers

4 - flat

washers

6 - small

screws

16 - medium

screws

1 A) Insert 3 cams into side panel as shown.

B) Insert 2 cams into interior panel as shown. Make sure

arrows on each cam points toward the nearest edge with

holes.

side

panel

NOTE: Make sure arrows

on each cam points toward

nearest edge with holes

interior

panel

1- exterior

panel

4 - large

bolts

5 - cam

covers

phillips head screwdriver

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We reccomend the use of hand tools instead of power tools)

2 - casters 2 - lock

casters

Summary of content (3 pages)

PAGE 1
NOTCH STORAGE CART ASSEMBLY HARDWARE 6 - small screws 16 - medium screws 5 - cams 5 - cam screws 8 - large screws 4 - spring washers 4 - small bolts 4 - flat washers 4 - large bolts 4 - shelf pins Missing hardware? Please call 800.606.6387 for replacements. 2 - casters Thank you for purchasing the Notch Storage Cart. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
NOTCH STORAGE CART NOTE: Do not over tighten cam screws A B front panel top panel front panel C interior panel back panel 2 A) Insert 2 cam screws into top panel as shown. B) Insert 1 cam screw into front panel as shown. C) Insert 2 cam screws into back panel as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. 3 Fit cam screw of front panel into corresponding hole of interior panel.
PAGE 3
NOTCH STORAGE CART casters bottom panel lock casters 6 Fit pre-assembled dowels of assembled unit into corresponding holes of bottom panel as shown. Secure bottom panel with 8 large screws using a screwdriver. Do not over tighten the screws. 7 Attach 2 casters and 2 lock casters to assembled unit with 4 medium screws per caster as shown. With the assistance of another adult, position unit upright.