Assembly Instruction

Made in Vietnam - r07 Page 4 of 5

NOTCH BOOKCASE

9 Fit dowels of assembled unit into corresponding holes

of side panel as shown. Secure all cams.

10 A. Fit dowels of assembled unit into corresponding

holes of bottom panel as shown. Secure bottom panel

with 2 screws using a screwdriver. Do not over tighten

the screws.

B. Secure bottom panel to side panel with 2 flat

washers, 2 spring washers and 2 bolts as shown,

using a screwdriver. Do not over tighten the bolts.

11 A. Fit dowels of assembled unit into corresponding

holes of top panel. Secure all cams. With the assistance

of another adult, position unit upright.

B. Cover all exposed cams with cam covers.

Assembly is now complete.

side

panel

bottom panel

NOTE: Do not over

tighten screws and

bolts

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

top panel