Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Notch Bookcase

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r07 Page 1 of 5

Thank you for purchasing the Notch Bookcase. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

NOTCH BOOKCASE

Missing hardware?

Please call 800.606.6387 for replacements.

1 - side panel1 - bottom

panel

1 - top panel

2 - large

shelves

2 - small

shelves

28 - cam

screws

28 - cams

28 - cam

covers

1 - front

panel

1 - back

panel

1 - interior

panel

2 - bolts 2 - screws 2 - spring

washers

2 - flat

washers

WALL MOUNTING HARDWARE

4 - small

screws

4 - large

screws

2 - wall

straps

4 - wall

brackets

4 - plastic

anchors

phillips head screwdriver

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

Summary of content (5 pages)

PAGE 1
NOTCH BOOKCASE ASSEMBLY HARDWARE 28 - cam screws 2 - flat washers 2 - bolts 28 - cam covers 2 - screws 28 - cams 2 - spring washers Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE Thank you for purchasing the Notch Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
NOTCH BOOKCASE NOTE: Do not over tighten cam screws back panel small shelf A front panel NOTE: Make sure arrows on each cam points toward nearest edge with holes 1 Insert 4 cam screws and 4 cams into back and front panels as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. Make sure arrows on each cam points toward the nearest edge with holes. A B large shelf 2 A. Insert 5 cams into each small shelf as shown. B. Insert 4 cams into each large shelf as shown.
PAGE 3
NOTCH BOOKCASE interior panel small shelf back panel 5 Fit cam screws of interior panel into corresponding holes of small shelves. With a screwdriver, turn each cam clockwise until it securely engages each cam screw. front panel 7 Fit dowels of assembled unit into corresponding holes of front panel as shown. Secure all cams. Made in Vietnam - r07 6 Fit pre-assembled dowels of assembled unit into corresponding holes of back panel as shown. Secure all cams.
PAGE 4
NOTCH BOOKCASE NOTE: Do not over tighten screws and bolts B side panel B bottom panel A 9 Fit dowels of assembled unit into corresponding holes of side panel as shown. Secure all cams. top panel 10 A. Fit dowels of assembled unit into corresponding holes of bottom panel as shown. Secure bottom panel with 2 screws using a screwdriver. Do not over tighten the screws. B. Secure bottom panel to side panel with 2 flat washers, 2 spring washers and 2 bolts as shown, using a screwdriver.
PAGE 5
NOTCH BOOKCASE WALL WALL ORIENTATION 1 ORIENTATION 2 Safety Mounting Assembly NOTE: Secure wall brackets to underside of top panel as shown For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.