Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
NEWPORT 4 DRAWER CHEST
Made in Vietnam 2004
Page 2 of 4
1 Attach the 2 side panels to the back panel using 6 long
machine screws, 6 spring washers and 6 small flat washers.
Securely tighten all screws.
2 Attach the front panel to the 2 side panels using 6 long
machine screws, 6 spring washers and 6 small flat washers.
Securely tighten all screws.
3 Fit base onto pre-inserted wood dowels on the bottom of
the side panels.
x 6
4 Secure the base using 6 long machine screws, 6 spring
washers and 6 small flat washers.
Securely tighten all screws.
Make sure the wheels
face up
Make sure the flat
edge of the base faces
the back.
x 6
x 6