Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Newport Four-Drawer Chest

Customer Service 800-967-6696 | http://www.crateandbarrel.com

NEWPORT 4 DRAWER CHEST

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in Vietnam 2004

Page 1 of 4

Thank you for purchasing the Newport 4 Drawer Chest.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

8 - short

machine screws

1 - front panel

1 - base

2 - side panels

1 - top panel 1 - small drawer

back panel

2 - small

drawer sides

8 - metal

knobs

28 - long

machine screws

28 - flat

washers

28 - spring

washers

1 - small drawer

front panel

3 - large drawer

back panels

6 - large

drawer sides

4 - drawer bottoms3 - large drawer

front panels

1 - back panel

32 - short

wood screws

Missing hardware? Please call 800.606.6387

for replacements.

Summary of content (4 pages)

PAGE 1
NEWPORT 4 DRAWER CHEST HARDWARE 8 - short machine screws 28 - flat washers Thank you for purchasing the Newport 4 Drawer Chest. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
NEWPORT x6 4 DRAWER CHEST Make sure the wheels face up x6 1 Attach the 2 side panels to the back panel using 6 long machine screws, 6 spring washers and 6 small flat washers. Securely tighten all screws. 2 Attach the front panel to the 2 side panels using 6 long machine screws, 6 spring washers and 6 small flat washers. Securely tighten all screws. x6 Make sure the flat edge of the base faces the back. 3 Fit base onto pre-inserted wood dowels on the bottom of the side panels.
PAGE 3
NEWPORT 4 DRAWER CHEST Make sure the wheels of the drawer slides face out and towards the back Make sure there is a longer overhang in the front. x 10 5 Attach the top panel to the assembly using 10 long machine screws, 10 spring washers and 10 small flat washers. Securely tighten all screws. 7 Slide drawer bottom into the groove at the base of the assembly. 6 Attach the small drawer side panel to the small drawer front panel and small drawer back panel with 4 short wood screws.
PAGE 4
NEWPORT 4 DRAWER CHEST 9 Attach 2 metal knobs to the small drawer front panel using 2 short machine screws. Assemble the 3 large drawers using the same method. 10 Insert drawers into the case, fitting the wheels on drawers into the metal tracks of case drawer slides. CLEANING AND CARE Clean wood surfaces with a damp cloth. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 11 Assembly is now complete.