Assembly Instruction

Made in China - r01
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
MOTEL DOUBLE GLIDER
Page 4 of 4
swing arm
8 A) Loosely attach 4 swing arms to outer leg frame
assembly with 1 large bolt, 1 small washer, 2 large
washers, 1 small washer, 1 lock nut and 1 acorn
nut per arm as shown.
B) Loosely attach 4 swing arms to inner leg frame
assembly with 1 large bolt, 1 small washer, 2 large
washers, 2 small washers and 1 lock nut per arm as
shown. At this point, using an allen wrench and a hex
wrench, fully tighten all bolts and nuts. Do not over
tighten the bolts.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
We recommend the use of outdoor furniture covers during inclement weather.
Periodically tighten bolts as necessary.
outer leg
frame assembly
B
A
large
bolt
large
washer
lock
nut
small
washer
side support
acorn
nut
large
washer
small
washer
A
NOTE: Make sure acorn
nuts are assembled on the
outside of assembly as shown
CORRECT
SIDE VIEW
side
support
outer right
leg frame
INCORRECT
SIDE VIEW
side
support
outer right
leg frame
B
A
A
B
B
A
B
NOTE: Do not
over tighten the
bolts