Assembly Instruction

Made in China - r01
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
MOTEL DOUBLE GLIDER
Page 3 of 4
end cap
6 A) Loosely secure center support of seat assembly to
inner leg frame assembly with 1 bolt, 2 small washers and
1 lock nut. Do not fully tighten the bolts.
B) Fit 2 end caps into inner right and left leg frames as
shown.
5 Attach outer left and right leg frames to bottom
crossbar as shown. Loosely secure left and right
outer leg frames to bottom crossbar with 2 long
bolts, 4 washers and 2 lock nuts as shown. Do not
fully tighten bolts.
bottom
crossbar
outer right
leg frame
outer left
leg frame
large
bolt
small
washer
plastic
spacer
lock
nut
B
B
7 A) With the assistance of another adult, loosely attach
seat assembly to inner leg frame assembly with 1 large
bolt, 1 small washer, 1 plastic spacer, 1 side support, 1
small washer and 1 lock nut per side as shown. Do not
fully tighten bolts.
B) Loosely secure each side support to inner leg frame
assembly with 1 bolt, 2 small washers and 1 lock nut as
shown.
seat
assembly
inner leg
frame assembly
A
A
small
washer
side support
seat
assembly
inner leg
frame assembly
side support
B