Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Motel Double Glider

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r01 Page 1 of 4

Thank you for purchasing the Motel Double Glider.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MOTEL DOUBLE GLIDER

10 - small

bolts

19 - large

bolts

2 - inner leg frames

(1 left, 1 right)

2 - seat

backs

2 - seats

4 - plastic

spacers

1 - top

crossbar

58 - small

washers

4 - acorn

nuts

4 - end

caps

1 - front

crossbar

1 - bottom

crossbar

2 - outer leg frames

(1 left, 1 right)

4 - swing

arms

1 - center

support

2 - side

supports

16 - large

washers

29 - lock

nuts

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

allen wrench

(included)

hex wrench

(included)

(We recommend the use of hand tools instead of power tools)

Summary of content (4 pages)

PAGE 1
MOTEL DOUBLE GLIDER HARDWARE Thank you for purchasing the Motel Double Glider. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
MOTEL DOUBLE GLIDER NOTE: Do not over tighten the bolts seat back seat seat assembly center support 1 Place seat and seat back onto a clean, padded surface. Attach seat to seat back with 4 small bolts, 8 small washers and 4 lock nuts as shown. Make sure bolts are attached from the backside of seat back. Secure, but do not over tighten the bolts and nuts, using an allen wrench and a hex wrench. Repeat for remaining seat and seat back.
PAGE 3
MOTEL DOUBLE GLIDER B end cap seat assembly bottom crossbar outer left leg frame B outer right leg frame inner leg frame assembly 5 Attach outer left and right leg frames to bottom crossbar as shown. Loosely secure left and right outer leg frames to bottom crossbar with 2 long bolts, 4 washers and 2 lock nuts as shown. Do not fully tighten bolts. 6 A) Loosely secure center support of seat assembly to inner leg frame assembly with 1 bolt, 2 small washers and 1 lock nut.
PAGE 4
MOTEL DOUBLE GLIDER INCORRECT SIDE VIEW CORRECT SIDE VIEW outer right leg frame side support lock nut acorn nut side support outer right leg frame A small washer large washer large washer small washer side support NOTE: Do not over tighten the bolts 8 A) Loosely attach 4 swing arms to outer leg frame assembly with 1 large bolt, 1 small washer, 2 large washers, 1 small washer, 1 lock nut and 1 acorn nut per arm as shown.